• 808 And Heartbreak Zip Download
• 808 Heartbreak Tracklist
• What Is 808s
• 808s And Heartbreak Influence
• 808s And Heartbreak Tracklist

The Mackie 808S 8-Channel Stereo Powered Mixer is packed with features but small and light. Twin 600W FR Series amps deliver 1000W @ 4 ohms and @ 2 ohms. 808s & Heartbreak: Roc-A-Fella 2010: My Beautiful Dark Twisted Fantasy: Roc-A-Fella 2011: Watch the Throne: Roc-A-Fella 2013: Yeezus: Def Jam 2016: The Life of Pablo: Getting Out Our Dreams 2018: Ye: GOOD 2018: Kids See Ghosts: Def.

When music producers are talking about 808s they are many a time referring to electronic drum sounds which were made with 'Roland's TR-808 Rhythm composer' drum machine.
The Roland TR-808 drum machine first appeared on the scene in 1980 but was later discontinued in 1983 when Roland Corporation stopped its production during the time.
However, over the years Roland Corporation launched a new product line of the classic drum machine and rebranded it as 'Roland AIRA TR-8', which not only features the TR-808 drum machine, but also incorporates TR-909 drum machine.
▶ The Meaning Of 808 In Hip Hop
In the context of Hip Hop music jargon, the meaning of 808 (or alternatively 808s) may not necessarily refer to the entire Roland TR-808 drum machine as it would in other music production discussions.
Instead when Hip Hop producers mention '808 drums' they are often talking about 808 Bass drums in particular, due to their frequent use in the genre of Rap music.
▶ Frequently Used 808 Drum Samples
Quite interestingly though, the most used drums sounds out of the Roland 808 drum machine are:

• 808 Bass Drum
• 808 Snare Drum
• 808 Clap Drum

Of course, there are instances were some music producers may use TR-808 hi-hats or TR-808 percussion samples but it goes without saying — the kick, snare and clap sounds are usually the go-to-sounds were most of the creativity starts from in terms of drum programming or drum sequencing.
Furthermore, in some scenarios music producers may feel the need to layer 808 drum samples to give the sound a little bit of weight or specifically for achieving their coveted signature sound.
You May Also Like:

808s are a pain in the you-know-what.

It’s nearly impossible to make them cut through a mix. They disappear on laptop speakers. And they often compete with the kick and bass—causing a boomy, muddy mess.

Ugh.

If you’re struggling to make your 808s sound clear and punchy, you’re not alone.

Don’t worry—these 5 tips will help. Read on to learn the secrets to crafting 808s that sound larger than life.

1. Start With The Right Sample

There’s no point trying to polish a turd.

But when it comes to 808s, that’s what many mixers do.

If you’re working with a bad 808 sample, you’re making the job harder than it needs to be. Instead, start with the right ingredients.

Look for 808 samples that are clean and punchy. Listen for odd overtones and harsh harmonics. It’s better to start with something a bit plain–Jane. You can always add character later.

For starters, I recommend Goldbaby’s Tape808 samples. Many producers consider these to be the best.

Start with a great sample, and the rest will be easy.

2. Shape Around Your 808s

Many mixers try to make their 808s cut by adding things.

More low end, distortion, tape saturation…

The truth?

If your 808 isn’t cutting through, it’s probably because something else is getting in its way.

This means you’ll often get better results by leaving the 808 alone, and instead shaping other tracks to fit around it.

If the 808 is dominating the sub-range of the frequency spectrum, you don’t need a lot of sub from anything else. Remove excess low end on tracks that don’t need it. Common culprits include kicks, basses, and synths. High-pass filters are your friends.

808 And Heartbreak Zip Download

Give the 808 room to breathe, and it will often cut through without any processing.

You can pull this off by using a technique called “subtractive EQ.” To learn more, watch the video below:

3. Add Distortion

808s are made up almost entirely of low-end frequencies. This is why they’re tricky to mix.

While you might hear them on big speakers, they often disappear on small ones that can’t play back sub frequencies.

So how do you make 808s cut on laptops, earbuds, and iPhones?

One word—distortion.

Adding distortion to an 808 will create harmonics that extend up the frequency spectrum. Small speakers can play these back, which will help make the 808 cut.

You can use plugins like SoundToys’ Decapitator to add distortion to 808s

While this technique often works well, be realistic. An 808 will never sound massive on an iPhone. This would defy the laws of physics.

When applying distortion to 808s, subtlety is key. You don’t need to be heavy-handed. A bit of color will do the trick.

4. Consider Length

Often times, 808s ring out too long. This can cause them to trample over the groove of a track.

The result?

A boomy, muddy low end.

Length matters. Make sure your 808s cut off before the next kick or downbeat.

If your 808 has already been printed to audio, use volume automation to cut it off manually. If you have access to the MIDI, program the 808 so it releases properly.

When in doubt, shorter works better. This is often the key to fitting 808s into busy tracks.

808 Heartbreak Tracklist

5. Tweak The Transients

What Is 808s

What’s the key to making 808s and kicks fit together?

Tweak the transients.

808s And Heartbreak Influence

If your kick has a sharp transient, you don’t need one on the 808 too. Get rid of the transient on the 808, and the two tracks will get out of each other’s way. The kick will provide the initial impact, while the 808 will cover the sustain and body.

You can use sidechain compression to make this happen. Here’s how:

1. Add a compressor to the 808.
2. Route the kick into its sidechain input.
3. Set the attack to its fastest value, so that every time the kick hits, the 808 turns down momentarily. This will shave the transient off the 808.
4. Adjust the release until the 808 returns naturally to full volume after the kick hits.

Using Waves’ C1 to apply sidechain compression to an 808

Get this right, and the two sounds will fit together perfectly.

With these 5 tips, you should have everything you need to mix 808s like a pro. I hope they help you make your 808s sound clear, punchy, and larger than life.

808s And Heartbreak Tracklist

Before you go—what’s YOUR favorite technique for mixing 808s? Share it by leaving a comment below.